Wireless ESP32 Module SX1276 LoRaWAN Protocol WiFi BLE Heltec for Arduino - products that work with official Arduino boards

Buy Wireless ESP32 Module SX1276 LoRaWAN Protocol WiFi BLE Heltec for Arduino - products that work with official Arduino boards

Feature:

 

-Main control chip ESP32-PICO (dual-core 32-bit MCU + ULP core), with LoRa node chip SX1276;

-RF shielding(contain a shield shell) and other protection measures;

-Integrated WiFi, LoRa, Bluetooth network connections, both of them are IPEX socket;

-Support the Arduino development environment;

-(Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base station running the LoRaWAN protocol (requires serial number activation, only the development of the company) The board is available, the serial number can be queried on this page);

-With good RF circuit design and basic low-power design (sleep current: 10uA theoretically), it is convenient for IoT application vendors to quickly verify solutions and deploy applications;

Source	Parameter
MCU	ESP32-PICO-D4( 240MHz Tensilica LX6 dual-core + 1 ULP, 600 DMIPS, 520KB SRAM, Wi-Fi, dual mode Bluetooth)
LoRa chip	SX1276
LoRa bands	EU_433, CN_470_510, EU_863_870, US_902_928  four bands optional
LoRa maximum output power	18 ± 2dB
Hardware resources	UART x 3; SPI x 2; I2C x 2; I2S x 1
	12 – bits ADC; 8 – bits DAC
	44 general GPIO
FLASH	internal 4MB(32M-bits) SPI FLASH
Interface	LoRa antenna (IPEX) x 1; Wi-Fi / BLE antenna (IPEX) x 1
Size	38.4 x 16.1mm
External device power control (Vext)	√
Low power design	deep sleep mode 10uA

Electrical characteristics	Condition	Minimum	Typical	Maximum
Power Supply	3.3V power supply(≥500mA)	2.7V	3.3V	3.5V
Power consumption(mA)	WIFI scan		115mA
	WIFI AP		135mA
	LoRa 10dB emission		100mA
	LoRa 12dB emission		105mA
	LoRa 15dB emission		120mA
	LoRa 20dB emission		145mA
Output	External device power control Vext (3.3V)			350mA

 

Package includes:

 

1 x Wireless ESP32 Module

Files support:

How to install Heltec ESP32 Aduino Develoment Environment:

http://www.heltec.cn/wifi_kit_install/

 

Wireless Shell Source Code:

Heltec ESP(ESP32 & ESP8266) framework (the basic of Heltec ESP series products Arduino running environment): https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series

Heltec ESP32 library (must work with Heltec ESP framework): https://github.com/HelTecAutomation/Heltec_ESP32

Heltec ESP32 LoRaWAN library (a standard LoRaWAN protocol library provide by Heltec Automation, need a license to active: http://www.heltec.cn/search/): https://github.com/HelTecAutomation/ESP32_LoRaWAN

 

Wireless Shell Pinout Diagram:

https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/blob/master/PinoutDiagram/Wireless_Shell.pdf

 

AutoCAD & 3D Drawing:

AutoCAD 2017 version drawing: https://docs.heltec.cn/download/Wireless_Shell.dwg

 

Reference Hardware Design:

Wireless Shell Reference Hardware Design Schematic: https://docs.heltec.cn/download/wireless_shell_reference_hardware_design.pdf

Wireless Shell Schematic & PCB Package (Altium Designer 18.1.7): https://docs.heltec.cn/download/wireless_shell_packages.zip

 

Summary of Common Problems:

http://www.heltec.cn/summary-of-common-problems-in-wifi-kit-series-continuous-update/?lang=en

 

Wireless ESP32 Module SX1276 LoRaWAN Protocol WiFi BLE Heltec for Arduino - products that work with official Arduino boards Buy Now