3pcs RF Nano V3.0 USB Module ATmega328P QFN32 5V 16M CH340 Integrate NRF24l01+2.4G Wireless Imme For Arduino

Buy 3pcs RF Nano V3.0 USB Module ATmega328P QFN32 5V 16M CH340 Integrate NRF24l01+2.4G Wireless Imme For Arduino

Feature:

 

1. Creative products, RF-Nano-Board: Upgraded nano board for Arduino, The main chip is ATMEGA328P-MU QFN32, the latest bootloader (Arduino IDE 1.8.8) was burned down. It is fully compatible with the common nano board. RF-Nano-Board is PIN-PIN with Arduino Nano V3.0,and share the same codes.

2. More convenient for application: The RF-Nano-Board integrates an NRF24L01+ module with Arduino nano v3.0 board, which is very convenient for 2.4G wireless connect application.

3. High quality material and Technology: We used high quality PCB original material and Immersion Gold Technology to make sure every board has smooth edge and more reliable.

4. Super small volume design, more convenient to use: The PCB size is only 48mm*19mm, the pin is fully compatible with Nano V3.0,No Soldering needed. The Mi cro usb port is more convenient to use.

5. RF-Nano-Board using CH340 chip to UART, you can download mac, windows, Linux three system drivers.

 

Specification:

 

Mi crocontroller ATmega328P

Nrf24L01+ 2.4G wireless

Architecture AVR

Operating Voltage: 5 V

Flash Memory: 32 KB of which 2 KB used by bootloader

SRAM: 2 KB

Clock Speed: 16 MHz

Analog I/O Pins: 8

EEPROM: 1 KB

DC Current per I/O Pins: 40 mA (I/O Pins)

Input Voltage: 7-12 V

Digital I/O Pins: 22

PWM Output: 6

Power Consumption: 19 mA

Weight: 9g

Parameter:

 

◆ It is fully compatible with the Arduino nano-v3.0 pin and its usage method

◆ BLE chip: TI CC2540

◆ Work channel: 2.4G

◆ Transmission distance: 50m

◆ Supports AT directive to configure BLE

◆ Support USB virtual serial port, hardware serial port, BLE three-way transparent transmission

◆ Support master and slave switch

◆ Supports sending over 20byte.

◆ Supports iBeacons

◆ Interface: Mi cro-USB

◆ Input voltage: USB power supply, Vin6~12V, 5V

◆ MCU: ATmega328P-MU QFN32

◆ Bootloader: Newest Arduino1.8.8

◆ Pin: Two Lines 2.54mm-15Pin

◆ Size: 48mm x 19mm x 12mm

 

Package includes: 

 

3 x RF Nano board

 

Note:

Please use Arduino IDE 1.8.6 or higher version, First, install the CH340 driver, then follow this selection path in Arduino IDE: Tools -  Board“Arduino Nano” Processor “ATmega328P",

otherwise you'll find that you can't burn any program. 

3pcs RF Nano V3.0 USB Module ATmega328P QFN32 5V 16M CH340 Integrate NRF24l01+2.4G Wireless Imme For Arduino Buy Now